Replacement UPVC Door Handles
If you're replacing the handles or want to add a bit of extra security, you'll find the right handle for your door. These upvc handle are easy to install and have the 92mm minimum center distance of multipoint locks.
The backplate fixing center and the dimensions of the lever/keyhole are the most important measurements. Compare these measurements with your existing measurements prior to making a purchase.
Lever/Pad
Lever pad handles consist of a lever on one side and a paddle-shaped handle on the other. They are designed to work with key wind locks, however, they can also be fitted to multipoint split spindle door locks (though you'll need an additional dual spindle lock case).
Once you have chosen the correct handle for the doors the available finishes will be shown in the drop-down list. Not all styles of handle are available in every finish though and you should always check the technical drawings and sizes sections for the specific product you're looking for to ensure that you get the correct size and fit.
When choosing the new set of lever pad door handles made of upvc, it is crucial to make sure that they are in line with the PZ (distance between the spindle of the handle and the centre of the hole in the cylinder) of your existing multipoint door locks, as these need to be in line for the doors to remain locked, whether from the inside or the outside. Our handles are designed to fit a wide range of standard cylinders, but it is a good idea to double-check before purchasing.
If you wish to upgrade to dual spindle levers you will need to remove the handles that are currently in use and then take apart the lock case. This will require an extra split inline cylinder. You can purchase these separately. We have included a technical illustration in the images of each product.
It is a good thing to loosen the screws that are holding the door handle you have and then examine the mechanism. If the screws are too tight it is possible to loosen them more. Then, you can remove the spindle from the door handle and replace it with your new Upvc handle. It is crucial to make sure that the handle is in the right position before installing it. You can do this by placing your finger between the door frame and the handle to make sure that it is level.
Lever/Lever
Lever door handles function as with a multi-point lock that utilizes an Euro Cylinder and are found on the majority of double doors made of upvc, aluminum doors and some wooden doors. They are available in two varieties, with an interior lever and a paddle on the outside. Sprung - These have an internal spring cassette within the backplate that helps bring the handle lever into an upright position. Non-sprung - they do not include a spring mechanism and will need to be manually pulled to bring the handle lever to a horizontal position.
To fix the door handle of a lever that is sagging it is necessary to locate the detent access hole or pin, which is typically a small round or rectangle shape hole or protruding pin situated on one side of the base plate. Once you have located the hole for accessing the detent or pin, you can remove it using the help of a screwdriver.
When the handle is in a horizontal position, you can re-install the screws and tighten them to make sure the handle stays fixed to the base plate. It is also recommended to apply a threadlocking adhesive solution to the screw threads to increase the grip and stop them from loosing over time.
There are a variety of reasons that door handles for levers drop. The most frequent cause is that the fixings aren't tight, causing the lever bearing to pull against the door. It could also be that the levers aren't operated in a straight line and this is compressing the latch mechanism and preventing it from fully springing back into service.
Another reason is that the lever that is sprung is not working properly. This is typically due to the spring not being in the correct position within the backplate. To check if door handle repairs near me to horizontal, simply move it.
If your door handles are loose, it is important to identify the issue fast, as this could lead to excessive wear on the screws and possibly to the handle falling off the base plate. You should also tighten any loose screws on a regular basis to prevent them from becoming looser.
Lever/Snib
These handles made of upvc are also referred to as 'Snib' handle sets and feature a snib button on the top of the lever that can be pressed down to lock your door if you don't use an dummy lock. They are typically fitted with a Fullex 68PZ (that's 68mm between the spindle centre and lever or the lock centre) door lock. We also carry a selection of other door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.
You can upgrade your home by changing the handles on your doors whether you are replacing existing handles or installing new ones on doors you have constructed. There are a variety of styles of upvc door handle available with traditional levers on backplate, curved or straight short latch and knob handles that resemble dummy knobs for multi-point locks, which are perfect for French doors.
Lever on backplate handles are usually rectangular in shape, however you can also find oval or circular-shaped versions, which are known as rose door handles. These kinds of door handles have an a knob or lever on a backplate which is placed behind the lever or knob and is sometimes referred to as the rosette, however some back plates can be detached for concealed fixing.
The handles are available in a variety of finishes, including coloured and chrome finishes, to match your door and other hardware, such as knobs hinges, and bolts. Some handles are supplied with grub screws, which assist in firmly attaching the lever or knob to the spindle. Other handles come with bathroom spindles that can be used to operate bathroom locks. They feature a thumbturn turn as well as a release mechanism, perfect to use on doors for bathrooms.
Mortise
The tubular latch is most likely to be the cause of this if your uPVC door handle is slammed shut. There may be a few things that can cause this, the first being an unlubricated latch plate on the latch plate. It is possible to solve this problem by opening the door and spraying lubricant onto the lock and handle. It could also be that the latch is loose from the backplate. This is a more difficult issue that requires a professional.
A multipoint door handle is an ideal solution to the problem of a stuck door handle. These handles mount through the door's faceplate and are operated with a thumb turn knob or key which activates a cam that locks the deadbolt. The handles are available in a number of sizes to suit different types of uPVC doors. They are also available with a variety of attractive finishes that match existing hardware. These handles are available via the internet or at the local locksmith. They are easy to install and come with clear directions.
To choose a replacement handle set, you'll have to know the PZ size of the cylinder. This is the distance from the edge of the inner door frame to the centre edge of the hole in the handle in millimetres. You will also need the type of lock on your door, irrespective of whether it's a mortise lock or a hook lock. Once you have these measurements, the most efficient method to determine the right handles is to use the filter by brand option on the website. This will help you narrow down your options, and then you'll be able to select the right size.
A typical handle set includes an arm, two screws of different lengths, drill guides, and installation instructions. Smart versions, like the Igloohome Smart Mortise 2+ come with a mortice lock with keypad. These are more complex units that are best designed for professional installers or highly skilled DIYers. Some handle sets include a range of additional accessories, such as weather strips, which can be used to enhance the look of the door.